|
|
|
|
|
TOPIC: Re:when La doesn't respond sometimes.
|
|
|
|
when La doesn't respond sometimes. 2 Years, 2 Months ago
|
|
|
I was having some issues with my sump/omla just not doing anything when the omla32 was plugged in. It seems to be the ICDC connector isn't mating correctly (digilent side), especially on the top row.
so if you get a connect in the client OK, then it just sits there and does nothing, check the connectors secured. the 7 segment is usually blank too.
|
|
|
|
The administrator has disabled public write access. |
|
|
|
Re:when La doesn't respond sometimes. 2 Years, 2 Months ago
|
|
|
I haven't seen this problem but thank you for reporting it. Are you able to determine why the connector is not mating every time? Would raising the omla32 up to make it more horizontal help?
-- Mike
|
|
|
|
The administrator has disabled public write access. |
|
|
|
Re:when La doesn't respond sometimes. 2 Years, 2 Months ago
|
|
|
Its the digilent idc female connector seems to be a bit weak, the springs gone, i added a couple of rubber feet at each end of the board and that seems to have helped.
i've been using it for the last hour or so at 100MHz with no issues.
I think its related to the ground signal, seems like if it floats it stops it.
|
|
|
|
Last Edit: 2009/11/28 22:24 By charliex.
|
|
|
The administrator has disabled public write access. |
|
|
|
|
